UV Castable Resin
£32.00 – £58.00 excl vat
FREE UK shipping on orders over £100
Photocentric’s castable resin for 3D printers has been created for the making of highly accurate jewellery parts for investment casting, and can be used on most UV LCD and DLP printers. Printed parts display high accuracy and detail which shows in the smooth, crisp finish on the cast parts. Virtually no ash or residue, no expansion, and highly detailed parts can be obtained using our dedicated castable resin.
Best Used for:
• High accuracy and detail
• No expansion or ash
• Ideal for castable jewellery parts
Compatible Printers:
UV DLP and UV LCD Printers such as LC Opus, MoonRay, Asiga, Envisontec, Flashforge, Anycubic, Wanhao, Phrozen, Sparkmaker, Kudo Bean and more.
Properties
UV Castable Resin
Tensile Properties
Tensile Modulus *
Tensile Strength *
Elongation at break *
1380 MPa
19.5 MPa
2-3%
ASTM D638
ASTM D638
ASTM D638
Flexural Properties
Flexural Strength *
Flexural Modulus *
22 MPa
632 MPa
ASTM D792
ASTM D792
Impact Properties
Impact Strength Notched Izod *
1.2 kJ/m2
ISO 180
General Properties
Hardness *
Viscosity
Density
Storage
75 Shore D
630 cPs
1.20 g/cm3
10<T>50°C
ASTM D2240
At 25°C Brookfield spindle 3
* Mechanical properties stated based on fully cured material.
Best Used for:
• High accuracy and detail
• No expansion or ash
• Ideal for castable jewellery parts
Compatible Printers:
UV DLP and UV LCD Printers such as LC Dental, MoonRay, Asiga, Envisontec, Flashforge, Anycubic, Wanhao, Phrozen, Sparkmaker, Kudo Bean and more.
Properties
Tensile Properties
Tensile Modulus *
1380 MPa
ASTM D638
Tensile Strength *
80 MPa
ASTM D638
Elongation at break *
2-3%
ASTM D638
Flexural Properties
Flexural Strength *
22 MPa
ASTM D792
Flexural Modulus *
632 MPa
ASTM D792
Impact Properties
Impact Strength Notched Izod *
1.2 kJ/m2
ISO 180
General Properties
Hardness *
75 Shore D
ASTM D2240
Viscosity
630 cPs
At 25°C Brookfield spindle 3
Density
1.20 g/cm3
Storage
10<T>50°C
* Mechanical properties stated based on fully cured material.
% elongation: How much an object can be stretched from its original shape.
Young’s Modulus: How much force is needed to stretch an object.
Flexural Strength: Ability to resist deformation under load.
Flexural Modulus: Measurement of an objects resistance to bend when force is applied (bend modulus).
HDT: Temperature at which a plastic deforms under heat.
Reviews