UV LCD Hard Resin

£55.00 excluding vat

Glass-like prints with a crisp finish are obtained when using our Hard 3D Resin. Prints will retain their shape under stretch and compression whilst displaying a high stiffness and high hardness. When using our Hard Resin you will 3D print objects that behave like commercial ABS.  

 

Printer Compatibility

 

Compatible with UV LCD printers only such as the D7, Anycubic Photon, Kudo Bean and many more.

 

View Printer Settings

 

Size: 1kg

 

Technical Data

 

Colour: Black

Viscosity 230 cPs (At 25ºC Brookfield spindle 3)

Hardness 77 Shore D (After post exposure)

Tensile strength 35 MPa (ASTM D638 After Post Exposure)

Tensile strength 15 MPa (ASTM D638 Before Post Exposure)

Tensile Modulus 2000 MPa (ASTM D638 After Post Exposure)

Elongation at break <1.5% (ASTM D638 After Post Exposure)

Storage 10<t>50°C

Density 1.19 g/cm3

 

Processing Instructions

 

Follow the procedures laid out in your UV-LCD printer user manual. For cure times, please refer to our UV Support Page. Resin should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Liquid polymer is soluble in water and soap. After cleaning objects, surface tack can be removed by leaving under water in UV light for 20 minutes. Total post cure should be at least 1 hour in UV light.

 

Clear
SKU: N/A Category:
Additional Information
Weight1.2 kg
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “UV LCD Hard Resin”

Your email address will not be published. Required fields are marked *