Daylight Precision Mould

£65.00 excluding vat

Precision Mould has been designed for creating high definition jewellery parts especially for the Precision Printer. The printed parts will display a high tensile strength, high accuracy and detail for the use in the modern jewellery market. The parts printed with this resin withstand high temperatures (up to 180°C) and pressures required for vulcanizing. Parts printed with the Precision Mould resin are ideal for the use as pattern in high resolution silicon rubber moulds. The printed parts will display a smooth surface and a good surface finish.

 

Key benefits include high tensile strength, high accuracy, no shape deformation at elevated temperatures, smooth surface, easy to use and finish.

 

Printer Compatibility

 

Compatible with Liquid Crystal Precision and Precision 1.5

Size: 1kg

 

Technical Data

 

Colour: Blue

Viscosity 700cPs (At 25ºC Brookfield spindle 3)

Hardness 90 Shore D ASTM D2240 (After post exposure)

Tensile strength 49 MPa ASTM D638 (After post exposure, 1h UV)

Elongation at break 2% ASTM D638 (After post exposure, 1h UV)

Storage 10<t>50°C

Density 1.1 g/cm3

 

Processing Instructions

 

Follow procedure laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner followed by water. The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties.

 

Clear
SKU: N/A Category:
Additional Information
WeightN/A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Daylight Precision Mould”

Your email address will not be published. Required fields are marked *