Best Practice. Post Exposure. We provide everything you need to optimise your printing process and deliver maximum material properties to your part.

No matter the size or complex of geometry, Photocentric Wash removes all excess resin residue from your printed models in minutes. Fast cleaning. Precise Results.

Slide Wash for 10 minutes or until thoroughly clean. Rinse with hot water before placing in your Photocentric Cure unit. Process Post exposing on the platform ensures greater dimensional accuracy. Transfer the platform to your Photocentric Wash unit. Once the parts are clean they are ready to be transferred to Photocentric Cure.

Whatever the geometry or resin, Photocentric Cleaner removes all excess resin residue from your printed models in minutes. Photocentric Cleaner is specifically formulated to solubilize 3D photopolymers, delivering superior, mark-free results in comparison to using IPA. It is safe, non-flammable and carries no irritant status. Read More

Slide It is designed to work with all of our Daylight, DLP, Laser and UV LCD resins, apart from our flexible resin range which should be cleaned with detergent and hot water. Photocentric Cleaner volume to fill the wash unit Technical Specifications 140 Prints 15L Capacity Number of prints 15ltr of Photocentric Cleaner will clean in regular use without changing Photocentric Wash units are available in different volumes for both desktop and large-format printing. Maximum Part Size 300 x 275 x 120 mm Photocentric Wash 15 LC Precision 1.5, LC HR2

External: 280 (H) x 340 (D) x 330 (W) mm

Internal: 120 (H) x 275 (D) x 300 (W) mm

18—28 °C

30 x 40kHz transducers

Equipped with 30 40kHz transducers capable of 1500W maximum power

13kg
Printer Compatibility

Dimensions



Suggested Operating Environment

Agitation Method

Ultrasonic capabilities


Weight
Included Accessories £469 | €562.80 | $656.60 Photocentric Resin cleaner only to be used with this product Lid
Tank
Basket
Power cable
Instruction manual
Outflow valve
Outflow pipe
Clip
Drainage cap
The Desktop Washing Solution. Support Buy Now

Slide Photocentric Cleaner volume to fill the wash unit Technical Specifications 300 Print Runs 99L Capacity Number of prints per 99ltr of Photocentric Cleaner will clean in regular use without changing Maximum Part Size 500 x 400 x 300 mm The Industrial Grade Washing Solution LC Pro, LC Magna

External: 760 (H) x 650 (D) x 820 (W) mm

Internal: 500 (H) x 400 (D) x 300 (W) mm

18—28 °C

30 x 40kHz transducers

Equipped with 30 40kHz transducers capable of 1500W maximum power

95kg
Printer Compatibility

Dimensions



Suggested Operating Environment

Agitation Method

Ultrasonic capabilities


Weight
Included Accessories £3790 | €4548 | $5306 Photocentric Resin cleaner only to be used with this product Lid
Tank
Basket
Power cable
Instruction manual
Outflow valve
Outflow pipe
Photocentric Wash 99 Support Buy Now

Slide £20 1L | £95 5L | £350 20L
Watch Buy Now Photocentric Resin Cleaner Download TDS
5-15 minutes and your models are clean picture_as_pdf Part on right washed with Photocentric Resin Cleaner compared to IPA on the left
picture_as_pdf Download SDS
Clean models, platforms and vats
Multiple use Quicker than IPA and other cleaning solutions.
Resin Cleaner is ideal for cleaning resin from your printer accessories as well. White marks are no longer an issue No need to refill or filter after every printer.
Available in 1ltr, 5ltr and 20ltr bottles with non-drip cap.
IPA can leave models with a cloudy white finish. Purchase Options
Slide close

Professional, reliable and tailored to the process. Our post-curing solutions strengthen printed parts, delivering maximum material properties and optimum colours. Strengthen Parts. Maximise Material Properties.

Slide 15 - 120 minutes (dependent on resin) will deliver dry, strong parts with material properties at their full potential. Technical Specifications You're In Control Strong Parts with Peak Properties Navigate with the microprocessor-controlled touch-screen display. Easy to use Transfer parts from your Wash 15 to Cure M, ready for a quick and easy finishing process. Photocentric Cure M External: 355 (H) x 410 (D) x 350 (W) mm

Internal: 200 (H) x 200 (D) x 200 (W) mm

Microprocessor

Touch Screen

LED UV/405 and 365nm

Input: 110-240V/ 0.6A/ 50-60 Hz

0-65°C

10-40 minutes
Dimensions



System

Display

Light Source

Power Source

Heating

Drying Time
Support £1549 | €1858.80 | $2169 The Desktop Post-Curing Solution. Buy Now

Slide 15 - 120 minutes (dependent on resin type) your printed parts will be dry, strong with material properties at their full potential. Technical Specifications Time-Regulated Control Strong Parts with Peak Properties Curing times depend upon geometry and grade of resin. Large Chamber Volume Transfer your parts from your Wash 99 to Cure L2. The Cure L2 takes the full Magna platform eliminating the need to remove printed parts beforehand. Photocentric Cure L2 External: 700 (H) x 600 (D) x 700 (W) mm

Internal: 550 (H) x 350 (D) x 500 (W) mm

User Interface

Thermostat and digital timer control

Full spectrum 100pc of led 405nm

Input: 110-240V

0-65°C

15-120 minutes
Dimensions



System

Display

Light Source


Power Source

Heating

Drying Time
Support £3090 | €3708 | $4018 The Industrial Grade Post Curing Solution Buy Now