£65.00 excluding vat
Compatible with Liquid Crystal Precision and Precision 1.5
Viscosity 690cPs (At 25ºC Brookfield spindle 3)
Hardness 92 Shore D ASTM D2240 (After post exposure)
Tensile strength 45 MPa ASTM D638 (After post exposure, 1h UV)
Elongation at break 2% ASTM D638 (After post exposure, 1h UV)
Density 1.1 g/cm3
Follow procedure laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. In order to clean the printed objects, we recommend Photocentric’s Resin Cleaner, followed by water. The cleaned objects should be post exposed at 80°C under UV for a minimum of 1 hour to obtain the maximum tensile properties. Alternatively, the parts can be post exposed on water under UV for 30 minutes.