Dental Model UV 3D Resin
£60.00 - £300.00 IVA esclusa
Spedizione gratuita nel Regno Unito per ordini superiori a 100 sterline
If you are looking for dental resin, Photocentric Dental Model UV photopolymer resin has been formulated to create detailed, high resolution dental models. The dental resin has been developed in conjunction with Dental Technologists to ensure an optimal colour, feel, and working characteristics. Ideal for orthodontic, study and working models. The prints show minimal shrinkage with a tolerance of 50µm max deviation on a full arch. Printed dental parts exhibit extremely high tensile properties and hardness, allowing for their use as a working or a vacuum forming model.
Caratteristiche principali:
- Alta precisione
- Forte
- Basso ritiro
Stampanti compatibili:
LC Opus, LC Dental, Anycubic, Wanhao, Phrozen, Sparkmaker, Kudo Bean, MoonRay, Asiga, Envisontec, Flashforge e altro
Proprietà
Dental Model UV Resin
Proprietà di trazione
Resistenza alla trazione *
Allungamento a rottura *
70 MPa
4%
ASTM D638
ASTM D638
Proprietà di flessione
Resistenza alla flessione *
Modulo di flessione *
85 MPa
85 MPa
1700 MPa
ASTM D792
ASTM D792
Proprietà d'impatto
Forza d'urto intaglio Izod *
3,9 kJ/m2
ISO 180
Proprietà generali
Durezza *
Viscosità
Densità
Immagazzinamento
90 Shore D
250 cPs
1,10 g/cm3
10<T>50°C
ASTM D2240
A 25°C Brookfield mandrino 3
Postcurato per 2 ore a 60°C
Caratteristiche principali:
- Alta precisione
- Forte
- Basso ritiro
Stampanti compatibili:
LC Dental, Anycubic, Wanhao, Phrozen, Sparkmaker, Kudo Bean, MoonRay, Asiga, Envisontec, Flashforge e altri
Proprietà
Dental Model UV Resin
Proprietà di trazione
Resistenza alla trazione *
70 MPa
ASTM D638
Allungamento a rottura *
4%
ASTM D638
Proprietà di flessione
Resistenza alla flessione *
85 MPa
ASTM D790
Modulo di flessione *
1700 MPa
ASTM D790
Proprietà d'impatto
Forza d'urto intaglio Izod *
3,9 kJ/m2
ISO 180
Proprietà generali
Durezza *
90 Shore D
ASTM D2240
Viscosità
250 cPs
A 25°C Brookfield mandrino 3
Densità
1,10 g/cm3
Immagazzinamento
10<T>50°C
Post-trattamento per 1 ora a 60°C in Cure L2
Odontoiatria atomica (proprietario verificato) -
Grande materiale consistente e resiliente, in grado di resistere al calore durante la formatura a pressione