Daylight Magna Hard

£255.00 excluding vat

Strong, accurate parts with low shrinkage are made using our Magna Hard resin. This 3D printing resin produces stiff parts that cannot be easily deformed with compression or tension. Great for large scale applications where large models or even short run parts are required. The parts will display mechanical behaviour comparable to Polycarbonate/ABS blends.

 

Printer Compatibility

 

Liquid Crystal Magna

Size: 5kg

 

Technical Data

 

Colour: Black

Viscosity 450cPs (At 25ºC Brookfield spindle 3)

Hardness 86 Shore D ASTM D2240 (After post exposure)

Tensile strength 52 MPa ASTM D638 (After post exposure, 1h UV)

Elongation at break 8-10% ASTM D638 (After post exposure, 1h UV)

Storage 10<t>50°C

Density 1.1 g/cm3

 

Processing Instructions

 

Follow the procedures laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the vat away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep the Magna door closed to prevent accidentally curing resin. Liquid polymer is soluble in water and soap however we recommend Photocentric’s Resin Cleaner, or IPA, followed by water. The cleaned objects should be post exposed at 70°C under UV for a minimum of 1 hour to obtain the maximum properties. Alternatively, the parts can be post exposed in clean warm water under UV for 1 hour.

Clear
SKU: N/A Categories: ,
Additional Information
WeightN/A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Daylight Magna Hard”

Your email address will not be published. Required fields are marked *