Daylight Magna Dental

£380.00 excluding vat

Accurate, high resolution models especially for dental work can be created using Magna Dental Model resin. Ideal for Orthodontic, study, and working models and created in collaboration with Dental Technologists to ensure optimal colour, feel and working characteristics. The prints show minimal shrinkage with a tolerance of 50μm max deviation on a full arch. Printed dental parts exhibit extremely high tensile properties and hardness, allowing for their use as a working or a vacuum forming model.

 

Printer Compatibility

 

Liquid Crystal Magna

Size: 5kg

 

Technical Data

 

Colour: White

Viscosity 900 cPs (At 25ºC Brookfield spindle 3)

Hardness 90 Shore D ASTM D2240 (After post exposure)

Tensile strength 63 MPa ASTM D638 (After post exposure Postcured 120 mins UV and heat 60°C water)

Elongation at break 4.3% ASTM D638 (Postcured 120 mins UV and heat 60°C water)

Storage: 10<t>50°C

Density: 1.09 g/cm3

 

Processing Instructions

 

Follow the procedures laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the vat away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep the Magna door closed to prevent accidentally curing resin. Liquid polymer is soluble in water and soap however we recommend Photocentric’s Resin Cleaner, or IPA, followed by water. The cleaned objects should be post exposed at 70°C under UV for a minimum of 1 hour to obtain the maximum properties. Alternatively, the parts can be post exposed in clean warm water under UV for 1 hour.

 

Clear
SKU: N/A Categories: ,
Additional Information
WeightN/A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Daylight Magna Dental”

Your email address will not be published. Required fields are marked *