Technical Specifications

Technology

Daylight polymer printing

Dimensions

38 × 35 × 59 cm
15 × 13.7 × 23 in

(W) x (D) x (H)

Weight

15 Kg (33 Lbs)

Power requirements

100–240 V, UK/USA/EU plug

LCD specification

9.7″ (2048×1536 px)

Connectivity

USB, Wireless, Ethernet

Printer control

Interactive 7″ Touch-screen

Resin Fill system

Manual

Build Volume

196 x 147 x 250 mm

7.7 x 5.8 x 9.8 in

Layer Thickness

50, 100 microns

0.002, 0.004 inches

XY pixel density

97 microns

Cure speed at 100 micron

25-55 sec/layer (depending on resin)

 

Printer Pack Contents

Printer Hood

Power Supply

Power Adaptor

Build Platform

Disposable Vat x 2

Allen Key

Strainer x 5

Funnel

Spatula

Blue Nitrile Gloves- Medium x 2

250gr of Daylight Hard Cream Resin

Print Sample

Quick Instruction

USB Memory Stick

Software

Built-In PrintFlow Printer Controller

Version 0.66

– Wifi/Ethernet Enabled

– Storage Capacity: 11Gb

Photocentric Studio

 

Minimum Computer Requirements:

Operating System Windows 7, 8 or 10

– Minimum 2.0 Ghz processor speed 2 cores. Recommended 4 cores

– GPU capable of opening OpenGL version 3.0 or higher

– NET framework version 4.0

– 64bit system: recommended 4GB

– 32bit system: recommended 2GB

Warranty

1 year Warranty

Package Contents

*Subject to availability in your territory

Contains all of the contents listed above along with set-up, initial training and support. Enquire Today!

LCHR2-Platform 3D Printer

LCHR2 Platform

The build platform is factory homed and fitted with a flex plate to ease print removal. The fitted shroud allows drain-off of resin back into the vat. Now there is no need to home the build platform before every print.

LCHR2 FLEX-PLATE

Made from high grade materials, and held to the platform with heavy duty magnets, the flex-plate allows you to remove your print without removing the platform. With a gentle flex and twist your print is released from the flex-plate without the need for scrapers.

LC HR2 Vat

With the newly designed HR2 vat it has an increased print success rate. No need to spend time undoing bolts on vat, as the price is economical, you have a choice to either simply buy a new vat or to reskin the vat when needed.

Vat Film can be purchased from our shop

Vat Film

10 sheets of vat film for the Liquid Cristal HR which is specialised low surface energy film, with high clarity and exceptionally low refraction index. 100my FEP.

LCHR2 SCREEN COVER

Screen cover for the Liquid Crystal HR2 to prevent the screen from damage from resin spills.

UV Exposure Unit

 

4 x 9W bulbs. For post exposure of small Daylight and UV resin printed parts.

Post Exposure Times:

Daylight Resins: 1 Hour

UV Resins: 2 Hours