imagepac superclear 2.55mm sachets

FREE UK shipping on orders over £100

In stock

The world’s first photopolymer pack and the most efficient way to make polymer stamps.

imagepac superclear is pre-packaged 50 durometer photopolymer in a sachet. One side of the sachet is rigid, aiding handing during processing and the other is flexible, delivering excellent imaging. Both sides of the imagepac superclear plastic pouch are removable. This provides a naturally sticky back for the stamp allowing easy repostioning on an acrylic block or attaching to the base of a self inker.

Benefits

• No pouring resin
• No mess
• No bubbles
• No laying of film, tape or pouring resin, saving over 10 minutes per plate. Typically 30% less waste
• Reduces your inventory
• Easier to use, can delegate process

Polymer Specifications

Hardness: 53 Shore A (51 to 56)
Viscosity: 15,000 cps (12,000 – 17,000)
Colours: Non-yellowing clear
Storage: 10-50°C

Typical Plate Properties

Plate thickness: 2.55mm
Fine line min: 0.152mm (0.006”)
Isolated dot min: 0.254mm (0.010”)
Tone range: 2-95%
Line screen max: 100dpi

Recommended Use

imagepac superclear is ideally suited for making craft stamps or for business stamp applications where you want to mask to produce large numbers of the same sized pre-cut stamps.

Processing Instructions

imagepac works on all existing types of
photopolymer exposure units. Lay negative, place imagepac on top with ‘imagepac’ readable, use standard back and main exposure times for your machine, wash, rinse, dry (optional), post expose under water, rinse, dry and apply.

Storage Conditions

Store sachets in closed box. Finished plates will last for years and deliver over a million impressions if kept away from sunlight and solvent based inks.