Magna Hard 3D Resin
£250.00 excl vat
FREE UK shipping on orders over £100
Strong, accurate parts with low shrinkage are made using our Magna Hard resin. This 3D printing resin produces stiff parts that cannot be easily deformed with compression or tension. Great for large scale applications where large models or even short run parts are required. The parts will display mechanical behaviour comparable to Polycarbonate/ABS blends.
5Kg
Best Used for:
• Printing large functional parts
• Mass manufacture of custom end-use parts
• Prototyping
Unique Features:
• High accuracy
• Strong, tough and long-lasting
Compatible Printers:
LC Magna (Not suitable for UV 3D Printers)
Properties
Tensile Properties
Tensile Modulus *
Ultimate Tensile Strength *
Elongation at break *
2600 MPa
52 MPa
10%
ASTM D638
ASTM D638
ASTM D638
Flexural Properties
Flexural Strength *
Flexural Modulus *
65 MPa
1550 MPa
ASTM D790
ASTM D790
Impact Properties
Impact Strength Notched Izod *
55 J/m
ASTM D256
General Properties
Hardness *
Heat Deflection Temperature *
Viscosity
Density
Storage
Colour
86 Shore D
85 °C
450 cPs
1.10 g/cm3
10<T>50°C
Black
ASTM D2240
ASTM D648
At 25°C Brookfield spindle 3
*Mechanical properties stated based on fully cured material.
Best Used for:
• Printing large functional parts
• Mass manufacture of custom end-use parts
• Prototyping
Unique Features:
• High accuracy
• Strong, tough and long-lasting
Compatible Printers:
LC Magna (Not suitable for UV 3D Printers)
Properties
Tensile Properties
Tensile Modulus *
2600 MPa
ASTM D638
Tensile Strength *
52 MPa
ASTM D638
Elongation at break *
10%
ASTM D638
Flexural Properties
Flexural Strength *
65 MPa
ASTM D792
Flexural Modulus *
1550 MPa
ASTM D792
Impact Properties
Impact Strength Notched Izod *
55 J/m
ASTM D256
General Properties
Hardness *
86 Shore D
ASTM D2240
Heat Deflection Temperature *
85 °C
ASTM D648
Viscosity
450 cPs
At 25°C Brookfield spindle 3
Density
1.10 g/cm3
Storage
10<T>50°C
Colour
Black
*Mechanical properties stated based on fully cured material.
Lennart van den Doel, Managing Director of 3D Next Level –
We print every day with the Hard Black resin on our 2 Magna printers, and this works really well for us. It’s easy to print with and has good properties for sanding and finishing if needed.