£55.00 excluding vat
Compatible with UV LCD printers only such as the D7, Anycubic Photon, Kudo Bean and many more.
Viscosity 560 cPs (At 25ºC Brookfield spindle 3)
Hardness 65 Shore D (After post exposure)
Tensile strength 26 MPa (ASTM D638 After Post Exposure)
Tensile strength 10 MPa (ASTM D638 Before Post Exposure)
Tensile Modulus 700 MPa (ASTM D638 After Post Exposure)
Elongation at break 10% (ASTM D638 After Post Exposure)
Density 1.18 g/cm3
Follow the procedures laid out in your UV-LCD printer user manual. For cure times, please refer to our UV Support Page. Resin should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Liquid polymer is soluble in water and soap. After cleaning objects, surface tack can be removed by leaving under water in UV light for 20 minutes. Total post cure should be at least 1 hour in UV light.