UV High Tensile- DLP Printers

£55.00 excluding vat

High-Tensile-Resin-Icon

High Tensile UV polymers are ideal for making hard objects that exhibit high strength and low elongation. Objects will not bend or deflect easily when under duress. They exhibit very high tensile shear properties, low elongation, and little shrinkage.

Printer Compatibility

 

Compatible with UV DLP Printers such as Flashforge Hunter, MoonRay, Asiga Pro2, Asiga Pico, Envisontec Perfactory

Size: 1kg

 

Technical Data

 

Colours: Grey

Viscosity 510 cPs (At 25ºC Brookfield spindle 3)

Hardness 80 Shore D (After post exposure)

Tensile strength 65 MPa ASTM D638 (After post exposure)

Tensile strength 22 MPa ASTM D638 (Before post exposure)

Elongation at break 6% ASTM D638

Heat deflection temp 63°C ASTM D648

Storage 10<t>50°C

Density 1.16 g/cm3

 

Processing Instructions

 

Follow the instructions laid out in your 3D printer user manual. Resin should be poured into the vat away from direct light. Resin can also be reused but should be poured through a filter to remove cured resin entering the bottle. Liquid polymer is soluble in water and soap however we advise cleaning your printed parts down with Photocentric Cleaner for optimal results. After making objects clean with a Photocentric wash unit and Photocentric Cleaner we advise washing the part down with warm water to remove the residue cleaner. Place your parts in a heated UV Curebox like the Photocentric Cure M or Photocentric Cure L, we recommend placing them in at 65 degrees for approximately 2 hour depending on the size of the part.

Clear
SKU: N/A Categories: ,
Additional Information
WeightN/A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “UV High Tensile- DLP Printers”

Your email address will not be published. Required fields are marked *