UV Flexible Resin- DLP Printers

£55.00 excluding vat

Photocentric Flexible Resin Icon

Flexible UV polymers are ideal for making objects where you want a little flexibility, but still a hard object. Thin objects will compress and deflect enough to bend and return. They exhibit very low tensile shear properties and high elongation, objects can be bent and compressed with some force.

 

 

Printer Compatibility

 

Compatible with UV DLP Printers such as Flashforge Hunter, MoonRay, Asiga Pro2, Asiga Pico, Envisontec Perfactory

Size: 1kg

 

Technical Data

 

Colours: Black, Clear, White

Viscosity 200 cPs (At 25ºC Brookfield spindle 3)

Hardness 85 Shore A (After post exposure)

Tensile strength 4.9 MPa ASTM D638 (After post exposure)

Tensile strength 1.5 MPa ASTM D638 (Before post exposure)

Elongation at break 60% ASTM D638

Storage 10<t>50°C

Density 1.18 g/cm3

 

Processing Instructions

 

Follow the procedures laid out in your 3D DLP printer user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. After making cleaned objects surface tack can be removed by leaving under water in UV for 20 minutes or longer. If any surface tack persists you can remove it by wiping the part with IPA.

Clear
SKU: N/A Categories: ,
Additional Information
Weight1.2 kg
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “UV Flexible Resin- DLP Printers”

Your email address will not be published. Required fields are marked *