Dental Model Resin

£80.00 excluding vat

Dental Model White polymer has been formulated to create detailed, high resolution dental models. The resin has been developed in conjunction with Dental Technologists to ensure an optimal colour, feel, and working characteristics. Ideal for Orthodontic, study and working models. The prints show minimal shrinkage with a tolerance of 50μm max deviation on a full arch. Printed dental parts exhibit extremely high tensile properties and hardness, allowing for their use as a working or a vacuum forming model. Dental model resin will provide excellent print performance on the LC Precision and LC HR printer range, allowing you to print crisp and clean dental models.

 

Printer Compatibility

 

Compatible with Liquid Crystal Precision, Precision 1.5, HR and HR2

Size: 1kg

 

Technical Data

 

Colour: White

Viscosity 900 cPs (At 25ºC Brookfield spindle 3)

Hardness 90 Shore D ASTM D2240 (After post exposure)

Tensile strength 63 MPa ASTM D638 (After post exposure Postcured 120 mins UV and heat 60°C water)

Elongation at break 4.3% ASTM D638 (Postcured 120 mins UV and heat 60°C water)

Storage 10<t>50°C

Density 1.09 g/cm3

 

 

Processing Instructions

 

Follow the procedures laid out in your 3D Liquid Crystal user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. Object should be post cured under UV in 60°C warm water to obtain the appropriate tensile properties and give a great surface finish.

Clear
SKU: N/A Categories: ,
Additional Information
Weight1.2 kg
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Dental Model Resin”

Your email address will not be published. Required fields are marked *