Daylight Magna High Tensile

£300.00 excluding vat


When strong parts are required, our unique Magna High Tensile is the resin of choice. Capable of producing incredibly detailed parts along with great strength, higher than that of injection moulded Polycarbonate with similar mechanical behaviour. Our 3D High Tensile Resin enables you to 3D print extremely strong and durable parts while maintaining an incredibly high accuracy.


Printer Compatibility


Liquid Crystal Magna

Size: 5kg


Technical Data


Colour: White

Viscosity 980 cPs (At 25ºC Brookfield spindle 3)

Hardness 92 Shore D ASTM D2240 (After post exposure)

Tensile strength 81 MPa ASTM D638 (After post exposure Postcured 120 mins UV and heat 60°C water)

Elongation at break 4.8% ASTM D638 (Postcured 120 mins UV and heat 60°C water)

Storage 10<t>50°C

Density 1.09 g/cm3


Processing Instructions


Follow the procedures laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the vat away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep the Magna door closed to prevent accidentally curing resin. Liquid polymer is soluble in water and soap however we recommend Photocentric’s Resin Cleaner, or IPA, followed by water. The cleaned objects should be post exposed at 70°C under UV for a minimum of 1 hour to obtain the maximum properties. Alternatively, the parts can be post exposed in clean warm water under UV for 1 hour.

SKU: N/A Categories: ,
Additional Information
Reviews (0)


There are no reviews yet.

Be the first to review “Daylight Magna High Tensile”

Your email address will not be published. Required fields are marked *