Daylight Magna Concept

£300.00 excluding vat

Bring your model figurines and other designs to life with the Magna Concept Green resin. Print jewellery prototypes or detailed figurines with high strength, durability, and most importantly high accuracy with finished smooth surfaces. Figurine prints can be shown as is or easily painted by airbrush.

 

Printer Compatibility

 

Liquid Crystal Magna

Size: 5kg

 

Technical Data

 

Colour: Green

Viscosity 690cPs (At 25ºC Brookfield spindle 3)

Hardness 92 Shore D ASTM D2240 (After post exposure)

Tensile strength 46 MPa ASTM D638 (After post exposure, 1h UV)

Elongation at break 2% ASTM D638 (After post exposure, 1h UV)

Storage 10<t>50°C

Density 1.1 g/cm3

 

Processing Instructions

 

Follow the procedures laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the vat away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep the Magna door closed to prevent accidentally curing resin. Liquid polymer is soluble in water and soap however we recommend Photocentric’s Resin Cleaner, or IPA, followed by water. The cleaned objects should be post exposed at 70°C under UV for a minimum of 1 hour to obtain the maximum properties. Alternatively, the parts can be post exposed in clean warm water under UV for 1 hour.

 

Clear
SKU: N/A Categories: ,
Additional Information
WeightN/A
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Daylight Magna Concept”

Your email address will not be published. Required fields are marked *