Daylight Flexible Resin

£44.00£55.00 excluding vat

Photocentric Flexible Resin Icon

Daylight Flexible resin is ideal for making objects where you want a little flexibility, but still a hard object. Thin objects will compress and deflect enough to bend and return. They exhibit very low tensile shear properties and high elongation, objects can be bent and compressed with some force.

Printer Compatibility


Compatible with Liquid Crystal 10″, HR & HR2

Size: 1kg


Technical Data


Colour: Amber

Viscosity 200 cPs (At 25ºC Brookfield spindle 3)

Hardness 85 Shore A (After post exposure)

Tensile strength 4.9 MPa ASTM D638 (After post exposure)

Tensile strength 1.5 MPa ASTM D638 (Before post exposure)

Elongation at Break 60% ASTM D638

Storage 10<t>50°C

Density 1.18 g/cm3



Processing Instructions


Follow the procedures laid out in your 3D Liquid Crystal’s user manual. Polymer should be poured into the tray away from direct sunlight. Polymer can be reused but should be poured through a filter to remove solid lumps. Keep hood on at all times. Liquid polymer is soluble in water and soap. After making cleaned objects surface tack can be removed by leaving under water in sunlight for 10 minutes.



SKU: N/A Categories: ,
Additional Information
Weight1.2 kg
Reviews (0)


There are no reviews yet.

Be the first to review “Daylight Flexible Resin”

Your email address will not be published. Required fields are marked *