Photopolymer,
Exposure Units

and Ancillaries

We are manufacturers of a wide variety of high quality photopolymer resins for office stamps

i50 Liquid

Excellent general purpose grade for narrow web printing and stamp manufacture.
It provides excellent print quality with minimal dot gain. It provides good ink transference on paper and card substrates

View Technical Data Sheet

i55 Liquid

High definition grade for demanding stamp applications and label printing. It is faster curing and provides you with greater pouring control with a slightly higher viscosity. It has good ink transference on paper and card substrates

View Technical Data Sheet

i90 Liquid

Ultra hard moulding photopolymer delivering 90 on the A scale and 50 on the D scale. It is rigid, inflexible and very, very hard. i90 is ideal for nameplates for cemeteries.

View Technical Data Sheet

Packing Options

1kg bottle
The nozzle has a non-drip pourer with a slot allowing over-poured resin to fill back into the bottle.

2kg bottle
Standard black bottle.

5kg jerry can
Standard black plastic jerry can

18kg plastic anti-glug jerry can
This is a clever plastic pail with an anti-glug pouring spout that allows air to be released when you pour quickly stopping erratic pouring. It is very tough and has four stacking points on the base and top to enable them to safely stacked on pallets.

18kg round metal pail
This is a very tough re-usable metal pail that is easy to pour the contents out very quickly. Metal lid has a retaining clip to ensure it doesn’t come loose in transit.

200kg drum
UN approved standard open-topped drum with retaining clip.

1000kg IBC
UN approved black (UV-proof) plastic in metal cage.

Exposure Units

A2 UV Exposure unit for stamp plate making

Dimensions 184 x 123 x 175 cm. Can make up to A2 size plates with each exposure. Use with 2 x A3 or 4 x A4 imagepac superclear or Xtra sachets. Robust and complete exposure unit with vacuum, display panel and 10 program options, rinse section, washout unit with add on reclaim system, post exposure drawer, dryer and UVC cupboard (for completely dry to touch plates). Flat working surface above drying and UVC cupboards.

View User Guide

A3 UV Exposure unit for stamp plate making

All in one UV exposure unit for stamp or flexo plate making. Dimensions: 144cm long x 68cm deep x 130cm high (168cm high with top open). Exposure unit can make 2 x A4 or 1 x A3 each time. Ideal for use with imagepac sachets (imagepac superclear or Xtra) but can also be used with liquid resin. Washout on top, post exposure below and drying and UVC cupboards to the side (for dry to touch plates). 25 minutes to make a plate from start to finish

Video Tutorial

Office Stamp Ancillaries

Products specially developed to give the best results when used with our liquid photopolymer resin.

Adhesive Base Film

125my coated substrate in microporous adhesive backed format. Optimized to achieve durable and fast adhesion onto our polymer while offering a self adhesive back for easy mounting.

Base Film

125my coated substrate in sheets or roll. Optimized to achieve durable and fast adhesion onto our polymer.

Cover Film

25my high resolution transparent film for stampmaking. Available in rolls and several standard sizes.

W5 Washout Liquid

Anionic surfactant specially formulated to emulsify our photopolymer in the shortest period of time and with the best possible results.

View Technical Data Sheet

Imageblack film

A4 size Inkjet or Laser film optimized to provide a DMax of 3.0 printed from your desktop printer.

Clamps

Acrylic clamps designed to compress imagepac.

Px1 Post Exposure

Special formulation salt or liquid added to PX water to speed up drying and provide a tack-free finish.

View Technical Data Sheet

A1 Antifoam

Defoamer to control or eliminate unwanted foam generated in the plate washing process.

View Technical Data Sheet

If you are interested in purchasing or would like more information on these products please enquire below