Technical Specifications


Daylight polymer printing


82 × 49 x 74 cm
33 × 20 x 29 in

(W) x (D) x (H)


66 Kg (145 Lbs)

Power requirements

100–240 V, UK/USA/EU plug

LCD specification

23.8″ (3840×2160 px)


USB, Display Port

Printer control

Via PC

Resin Fill system


Build Volume

470 x 240 x 340 mm

18.5 x 9.4 x 13.4 in

Layer Thickness

50, 100 microns

0.002, 0.004 inches

XY pixel density

137 microns

Cure speed at 100 micron

50-100 sec/layer (depending on resin)

Printer Pack Contents


Rachet Socket Wrench

Nut Socket

Allen Key


Paper Strainer x 10

Spray Bottle

Nitrile Gloves x 4

Vat Film Pack sub-assembly

Gasket pack sub-assembly

5 Kg Pro Hard Black resin

2 VAT film replacement

USB Cable

Display Port Cable

AC Cable

Printer Instructions


Photocentric Studio

Perpetual License for use with 2 pc’s. Compatible with Windows.


Minimum Computer Requirements:

Operating System Windows 7, 8 or 10

– Minimum 2.0 Ghz processor speed 2 cores. Recommended 4 cores

– GPU capable of opening OpenGL version 3.0 or higher

– NET framework version 4.0

– 64bit system: recommended 4GB

– 32bit system: recommended 2GB

Spare DisplayPort connection

Note: In order to run at max resolution a 4K video card is required.


1 year Warranty

Liquid Crystal Pro Resin Vat

The Liquid Crystal Pro vat body is fabricated from thermally welded 12mm Polypropylene: a tough plastic that is resistant to damage from cleaning chemicals.  The top film frame is also Polypropylene.  The bottom film frame is 4mm stainless steel and contributes further to the overall strength of the assembled vat.  It won’t corrode when exposed to resin, water or cleaning chemicals.  The skin of the vat is 100 micron FEP film, providing a flexible, non-stick surface to ensure good release of the printed part from the screen.

Liquid Crystal Pro Print Plate

The Liquid Crystal Pro print platform is made from 5mm Aluminium tooling plate, bolted to a strengthening frame of 10mm tooling plate.  This material is machined to ensure flatness, then cut to shape using a water-jet cutter, avoiding the potential for heat distortion caused by laser cutting.  The L brackets are also Aluminium so there are no concerns about corrosion due to contact with resin, water or cleaning chemicals.  The print plate is perforated to allow resin flow, ensuring consistent performance in the early layers of each print.

Liquid Crystal Pro VAT Film x5 sheets with gaskets

This pack contains five sheets of 100 micron FEP film, cut to the correct size for your Liquid Crystal Pro vat.  We recommend that you re-skin your vat after 400 hours of printing, or if any visible damage is detected.  100 micron FEP film provides a flexible, non-stick surface to ensure good release of the printed part from the screen.  It is thick and tough enough to last for days of printing time. Also included in this pack are five vat top gaskets and five vat bottom gaskets.


Bearded Yell




Turbine Fan


Prosthetic Leg

Prosthetic-Leg 3D Printing