Daylight Magna Hard
From: £255.00 excl vat
Strong, accurate parts with low shrinkage are made using our Magna Hard resin. This 3D printing resin produces stiff parts that cannot be easily deformed with compression or tension. Great for large scale applications where large models or even short run parts are required. The parts will display mechanical behaviour comparable to Polycarbonate/ABS blends.
5Kg
Best Used for:
• High accuracy
• Ideal for large parts
• Tough
Industry:
• Engineering
• Prototyping
Compatible Printers:
LC Magna (Not suitable for UV 3D Printers)
Properties
Tensile Properties
Tensile Strength *
Elongation at break *
52 MPa
8-10%
ASTM D638
ASTM D638
Flexural Properties
Flexural Strength *
Flexural Modulus *
65 MPa
1550 MPa
ASTM D792
ASTM D792
Impact Properties
Impact Strength Notched Izod *
2.01 kJ/m2
ISO 180
General Properties
Hardness *
Heat Deflection Temperature *
Viscosity
Density
Storage
Colour
86 Shore D
81 °C
450 cPs
1.10 g/cm3
10<T>50°C
Black
ASTM D2240
ASTM D648 (0.455 MPa)
At 25°C Brookfield spindle 3
* Post cured for 1hr at 60°C in Cure L2
Best Used for:
• High accuracy
• Ideal for large parts
• Tough
Industry:
• Engineering
• Prototyping
Compatible Printers:
LC Magna (Not suitable for UV 3D Printers)
Properties
Tensile Properties
Tensile Strength *
52 MPa
ASTM D638
Elongation at break *
8-10%
ASTM D638
Flexural Properties
Flexural Strength *
65 MPa
ASTM D792
Flexural Modulus *
1550 MPa
ASTM D792
Impact Properties
Impact Strength Notched Izod *
2.01 kJ/m2
ISO 180
General Properties
Hardness *
86 Shore D
ASTM D2240
Heat Deflection Temperature *
81 °C
ASTM D648 (0.455 MPa)
Viscosity
450 cPs
At 25°C Brookfield spindle 3
Density
1.10 g/cm3
Storage
10<T>50°C
Colour
Black
* Post cured for 1hr at 60°C in Cure L2
1 review for Daylight Magna Hard
You may also like…
-
Photocentric Resin Cleaner
£14.00 – £252.20 excl vat -
Photocentric Resin Cleaner 30
£14.00 – £252.20 excl vat -
Daylight Magna Dental Model
£300.00 – £1,045.00 excl vat -
Daylight Magna Concept
From: £300.00 excl vat -
Daylight Magna High Tensile
From: £300.00 excl vat -
Photocentric Cure L2
£3,208.46 excl vat
Lennart van den Doel, Managing Director of 3D Next Level –
We print every day with the Hard Black resin on our 2 Magna printers, and this works really well for us. It’s easy to print with and has good properties for sanding and finishing if needed.