Precision-White-Hard-3D Resin Photocentric

Daylight Precision Hard

Available Colours

White

Glass-like prints with a crisp finish are obtained when using Our Hard 3D Resin. Prints will retain their shape under stretch and compression whilst displaying a high stiffness and high hardness. When using Our Hard Resin you will 3D print objects that behave like commercial ABS.  

Price 

£65

$91

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

980 cPs

Hardness 
(ASTM D2240 After post exposure)

94 Shore D

Tensile strength 
(ASTM D638 Postcured 120 mins UV and 80°C heat)

80 MPa

Elongation at break 
(ASTM D638 Postcured 120 mins UV and 80°C heat)

5.6%

Storage 

10<t>50°C

Density

1.09 g/cm3

Exposure Times

Precision-Model-Resin--icon

Daylight Precision Model

Available Colours

Grey

Easy to paint with a smooth finish prints, are readily attainable using our Precision Model resin. Developed for producing highly detailed prints, low visibility of layer lines and with an ultimate dry touch and smooth finish allows users to easily paint any piece.

Price 

£55

$77

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

121 cPs

Hardness 
(ASTM D2240 After post exposure)

52 Shore D

Tensile strength 
ASTM D638 (After post exposure)

11 MPa

Tensile modulus
ASTM D638 (After post exposure)

560 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

5%

Storage 

10<t>50°C

Density 

1.09 g/cm3

Castable-Resin-Icon_

Daylight Precision Dental Castable

Available Colours

Smoky Quartz

Precision Dental Castable is ideal for creating highly accurate castable items such as crowns, bridges and partial denture bases, anything that would previously have used the time consuming waxing procedure to create. This product has been formulated to burn evenly at regularly increasing temperature stages to reduce gas pressure in the cast and provide almost no ash content. It will give almost no expansion upon heating.

Price 

£58

$81

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

140 cPs

Hardness 
(After post exposure)

75 Shore D

Tensile strength 
ASTM D638 (After Post Exposure)

15 MPa

Tensile strength 
ASTM D638 (Before Post Exposure)

3.7 MPa

Tensile Modulus
ASTM D638 (After Post Exposure) 

628 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

6.5%

Storage 

10<t>50°C

Density

1.09 g/cm3

Daylight Dental Model

Available Colours

White

Accurate, high resolution models especially for dental work can be created using Dental Model resin. Ideal for Orthodontic, study, and working models and created in collaboration with Dental Technologists to ensure optimal colour, feel and working characteristics.

Price 

£80

$112

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

900 cPs

Hardness 
(After post exposure)

90 Shore D

Tensile strength 
ASTM D638 (After Post Exposure, postcured 120 minutes UV and heat 60°C water)

63 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

4.3%

Storage 

10<t>50°C

Density

1.09 g/cm3

Precision-Castable-Red-ring-with-casted-rings 3D Printing Jewellery

Castable-Resin-Icon_

Daylight Precision Cast

Available Colours

Red

For creating highly accurate jewellery parts for investment casting, use our Cast resin. Printed parts display high accuracy and detail which shows in the smooth, crisp finish on the cast parts. Virtually no ash or residue, no expansion, and highly detailed parts can be obtained using Cast.

Don’t forget to refer to our casting guidelines for help in casting.

Price 

£65

$91

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

510 cPs

Hardness 
(After post exposure)

75 Shore D

Tensile strength 
ASTM D638 (After Post Exposure, 1h UV)

19.5 MPa

Tensile Modulus
ASTM D638 (After Post Exposure, 1h UV) 

1380 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

2-3%

Storage 

10<t>50°C

Density

1.2 g/cm3

Daylight Precision Concept

Available Colours

Green

Bring your jewellery ideals to life with Concept. Print perfect prototypes with high strength, durability, and most importantly high accuracy and details with smooth surfaces. Each print can be shown as is or easily painted by air brush. Use our Jewellery range for 3D printing highly detailed and accurate jewellery models.

Price 

£65

$91

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Precision-Concept-Ring Photocentric 3D Printing Jewellery

Viscosity
(At 25ºC Brookfield spindle 3)

690 cPs

Hardness 
(After post exposure)

92 Shore D

Tensile strength 
ASTM D638 (After Post Exposure, 1h UV)

45 MPa

Elongation at break 
(ASTM D638 After Post Exposure, 1h UV)

2%

Storage 

10<t>50°C

Density

1.1 g/cm3

Precision-Mould-Blue-Pendant Photocentric 3D Printing Jewellery

Daylight Precision Mould

Available Colours

Blue

Ideal for the creation of high resolution silicone rubber moulds, we have Mould resin. Parts can withstand the temperatures (up to 180°C) and pressure required for vulcanisation. Along with this the parts show great strength, smooth surfaces, and highly accurate prints.

Price 

£65

$91

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

700 cPs

Hardness 
(After post exposure)

90 Shore D

Tensile strength 
ASTM D638 (After Post Exposure, 1h UV)

49 MPa

Elongation at break 
(ASTM D638 After Post Exposure, 1h UV)

2%

Storage 

10<t>50°C

Density

1.1 g/cm3

Firm-Resin-Icon

Daylight Precision Firm

Available Colours

Black

Need some resin to make your items feel more realistic? Our Precision Firm Resin is the way to go. Ideal for creating parts that hold their shape whilst also being able to bend and flex slightly without snapping. This resin produces parts with similar mechanical behaviour to that of Polypropylene.

Price 

£55

$77

Available in 1kg bottles with non-drip cap. 

*Local Tax may apply

 

Viscosity
(At 25ºC Brookfield spindle 3)

560 cPs

Hardness 
(ASTM D2240 After post exposure)

65 Shore D

Tensile strength 
(ASTM D638 After Post Exposure)

26 MPa

Tensile strength 
(ASTM D638 Before Post Exposure)

10 MPa

Tensile modulus
(ASTM D638 After Post Exposure)

700 MPa

Elongation at break 
(ASTM D638 After Post Exposure)

10%

Storage 

10<t>50°C

Density

1.18 g/cm3

Cleaner